10 Best Grooming Tables For Large Dogs in 2026

A 220-pound weight capacity means this table supports large breeds securely, while the 12-to-40-inch height range lets you adjust for any dog size. The full stainless steel frame resists corrosion, so it holds up well in wet grooming environments. The electric lift uses dual foot pedals for hands-free height adjustment, and the ultra-quiet motor helps keep pets calm during grooming. The removable silicone tabletop has a textured bone pattern for traction and is designed for comfort, making it suitable for pets that need a stable surface.

The 220-pound capacity excludes dogs over that weight, so if you regularly work with breeds exceeding that limit, a table with higher capacity, like the Garvee hydraulic model rated for 350 pounds, may be a better fit. The table also lacks a built-in tool shelf, so you will need to keep your tools elsewhere. For most large-dog owners and mobile groomers, the stainless steel construction, quiet lift, and thoughtful tabletop design offer good value compared to less durable electric tables. It is a reliable choice for long-term use.

The reversible non-slip tabletop, tool organizer, and dual AC outlets with USB ports turn the whole setup into a mobile workstation where you keep clippers, grinders, and your phone plugged in and within reach. It suits groomers who want one table that does everything, adjust by hand or foot, roll on retractable casters, and secure the dog with four grooming loops plus an overhead bar with extra restraint rings.

The trade-off shows up in the lift capacity. At 220 pounds, it is lower than some hydraulic models listed in the guide, such as the Garvee which carries 350 pounds, so owners of very heavy dogs may want to check that number. What you gain in return is a smooth, quiet, vibration-free electric actuator and a lower starting height of 10 inches. That is much easier for a stiff-jointed Great Dane to step onto than the 22-inch minimum on most hydraulic tables. For anyone who grooms large dogs regularly and values convenience over raw capacity, this is the more thoughtful workspace.

A 350-pound loading capacity means this table will handle the biggest dogs you’re likely to work on, from lumbering Labradors to full-grown Great Danes, without the frame flexing or groaning under the load. The Z-shaped hydraulic lift does what a straight scissor lift can’t, it spreads the base wider for stability, so even a large, wiggly dog won’t tip the table or send your clippers flying. For anyone who grooms large breeds regularly, the non-slip PVC top and three adjustable nooses give you the control you need to keep a nervous or squirmy dog safely in place while you work.

The Garvee uses a manual hydraulic pump instead of an electric motor like the Flying Pig Professional model. You press a foot pedal to raise the height, which takes a few seconds and some effort, and at 95 pounds it is not something you will casually reposition mid-groom. The height range of 22 to 39 inches works well for most users, but if you need quick, hands-free height changes or plan to roll the table between rooms, you will want an electric option with leveling wheels. For a stationary setup in a home salon or dedicated grooming space, the Garvee’s heavy-duty build and hydraulic stability are hard to beat.

The electric X-lift lets you raise the table with the dog already standing on it, so you skip the awkward step of heaving a heavy animal onto a tall surface. The 49.6-inch-long tabletop gives you room to work a Labrador or Rottweiler without crowding your tools. With a 150-pound moving capacity and a double grooming arm that has two adjustable loops, this table suits owners who regularly handle large dogs. It provides a stable, spacious work area that adjusts to your own height at the push of a button.

One catch is that the moving lift only supports up to 150 pounds, so if your dog is heavier than that, the static 330-pound rating will not help during the actual lift. Assembly is required, and the 49.6-inch length means it takes up more floor space than some smaller tables. For owners who need a large surface and the convenience of electric adjustment, this table offers a good balance. If your dog is over 150 pounds, you may want to consider a model with a higher moving capacity.

The 50-by-26-inch rubber top resists slipping and cleans easily, and the two nooses let you secure a wiggly dog without fighting a single loop. This table suits owners who need serious vertical range and don’t want to pump a hydraulic pedal all afternoon.

The trade-off is workspace: at 26 inches deep, a very broad-chested dog may hang off the edges during a full-body clip. The Garvee hydraulic table supports 350 pounds on a deeper 26.6-inch top, but its height tops out at 39 inches, so you give up some rise. If your dog is tall but not exceptionally wide, the UDSONFY gives you that extra lift. Just plan to set it on a level floor, since the listing doesn’t mention leveling wheels.

A 350-pound capacity and a foot-pedal hydraulic lift mean you can raise or lower a heavy, wriggling dog without taking your hands off the job. The textured rubber top (42.4 x 23.5 inches) gives a large dog enough grip to feel steady, and the adjustable overhead arm with two leash loops keeps them positioned without constant readjustment. For anyone who grooms big dogs regularly, especially if you’re working alone, the foot pedal is a practical upgrade over cranking a manual table, letting you match the dog’s height as you move from back to legs.

The height range also stops at 35 inches, which is fine for most standing work but lower than the 39-inch top end on the Garvee hydraulic table. For the typical large Lab, Shepherd, or Rottweiler, though, the Arlopu’s foot-pedal convenience and solid steel frame make it a smart, no-nonsense pick.

A 350-pound load capacity and a Z-shaped hydraulic base that resists shaking and tipping make this table a stable platform for large dogs that don’t enjoy standing still. The anti-slip rubber top with aluminum edges cleans up fast after muddy paws or loose fur, and the height range from 22 to 38.6 inches lets you work at a comfortable level for grooming tasks like bathing, trimming, drying, and clipping. For anyone who has wrestled a restless large dog on a flimsy folding table, the solid feel here is the whole point.

The trade-off is weight: at 102.1 pounds, this is not a table you casually slide across the garage. Once it is in place, it stays put, but moving it between rooms or to a mobile grooming setup takes real effort. Compared to the GDFStudio electric model, which lifts with a motor, the MERXENG requires you to pump the hydraulic foot pedal each time you change height. That extra work is a fair exchange for not dealing with an electric motor that can fail, but if speed is your priority, an electric table may suit you better.

A 350-pound load capacity means this table handles the biggest breeds without any trouble, and the Z-shape hydraulic base keeps things stable while you work. The quick height adjustment lets you change positions in seconds, which saves your back when switching between trimming a Great Dane’s back and working on its paws. For anyone who grooms large dogs regularly and wants a solid, no-nonsense hydraulic table that does not wobble, this model delivers on stability and speed.

Weight is the main drawback: at 102.1 pounds, it is not something you will casually move around the shop. The desktop is 43.6 inches long and 23.6 inches wide, so if you routinely work on extra-long dogs like Irish Wolfhounds, you might want to measure your workspace first. But for most large-breed groomers, the stability and speed of adjustment make the extra heft worth it.

A 350-pound capacity and a reinforced Z-lift base mean this table handles the biggest dogs without that nervous wobble you get from lighter frames. The hydraulic foot pedal lets you adjust height while keeping both hands on the dog, no reaching for buttons or cranks mid-groom. Three separate safety loops give you options to position a restless or nervous dog comfortably, which is the whole point of a secure restraint system. This is the table for owners who prioritize stability and safety over speed, especially if you have ever had a large dog spook and try to jump off a grooming table.

Weight and pace are the trade-offs here. At 103.2 pounds, this is not a table you will casually move between rooms, and the hydraulic lift takes a few pumps to change height, slower than electric models like the Flying Pig Professional. But that manual system also means no motor to fail, no cord to trip over, and quieter operation for skittish dogs. If you groom multiple large dogs daily and value quick height changes, an electric table might save you time. If you want bombproof restraint and do not mind a few extra seconds per adjustment, this is the better long-term investment.

A 330-pound capacity supports the heaviest breeds like Great Danes and Mastiffs without worry. The hydraulic Z-lift adjusts from 21 to 36 inches, letting you set a comfortable working height to reduce back strain during long grooming sessions. The 42.5-inch-wide non-slip PVC top provides a stable workspace, and the adjustable arm with two nylon loops helps keep pets steady for tasks like nail trimming or scissoring.

This model uses a hydraulic lift rather than an electric one. The Flying Pig electric table relies on a motor for lifting, which may be faster if you are changing heights often between dogs. Assembly is required, so plan some setup time before first use. For someone who wants a stable, high-capacity table without the complexity of a motorized lift, this is a practical choice.