10 Best Dog Brushes For Shedding Long Hair in 2026

The FURminator Large Dog Undercoat deShedding Tool is built for one job: pulling loose undercoat hair from big, long-haired dogs without damaging the topcoat. At 0.6 pounds and with an ergonomic handle, it’s light enough to work through a full coat without wearing out your hand. The fur ejector button lets you clear the blade with one push, so you spend less time picking hair off the tool and more time actually grooming.

The trade-off is that this tool is purpose-built for large dogs over 50 pounds. If you have a smaller long-haired breed, you’ll need a different size. Compared to the Chris Christensen Big G slicker brush, the FURminator focuses on undercoat removal rather than detangling and fluffing. For owners of large long-haired dogs who want to cut down on shedding without a wrestling match, this is the straightforward choice.

Thirty percent more pins than a standard slicker means this brush does the heavy lifting before you break a sweat. That combination makes it the go-to tool for doodle coats, curly coats, and any long-haired breed that mats easily.

At eight inches long, it is not a pocket brush, and unlike the Hertzko Self Cleaning Slicker, there is no retractable bristle mechanism here. Hair remains trapped inside the brush until removed. That is a minor slowdown when you are working through a heavy shed, but the extra pin density and reach make up for it if you are dealing with thick, mat-prone coats.

The push-button retraction mechanism makes fur removal quick and easy after each grooming session, so you spend less time cleaning the brush. The soft, fine bristles are designed not to scratch your pet’s skin, and the comfort-grip handle minimizes hand fatigue during extended use. This brush works on both long and short coats, making it a versatile tool for everyday de-shedding and detangling.

The brush head is 3 inches wide, which means covering a large dog may take more strokes compared to a wider brush like the Chris Christensen Big G (4 inches wide). The fine bristles are effective for removing loose hair and tangles, but they are not designed for heavy mats or dense undercoat clumps, a rake-style tool would be better for that. For dogs with thick double coats, you might use a dedicated undercoat rake for the heavy work and the Hertzko for finishing and regular maintenance.

The patented two-tier polymer teeth are the key detail here: longer teeth reach the undercoat to lift dirt and loose fur, while shorter teeth sweep away surface hair, with no metal blades scraping skin. At just 0.2 pounds with an ergonomic shape, this brush is built for long grooming sessions on double-coated breeds without tiring your hand or causing brush burn. It works on both wet and dry fur, so you can use it during bath time and between baths, making it a gentle deshedding tool for regular maintenance.

The polymer teeth are gentle on skin, preventing brush burn during grooming, but they won’t cut through established mats, so this brush is best for regular deshedding maintenance rather than dematting. Its compact size means covering a large breed like a Golden Retriever takes more passes compared to wider tools such as the FURminator, which measures 6.5 inches long. For dogs sensitive to metal rakes or owners who prioritize comfort over speed, this is the gentler option, but heavy tangles will still require a separate rake.

The one-click self-cleaning button on this rake means you never have to pick fur out of the tines by hand, just press and the release plate pushes everything out in one go. That matters most during spring and fall coat blows when a deshedding tool fills up after every few strokes. With 18 rounded stainless steel teeth reaching deep into double coats like those of Golden Retrievers, Huskies, and Maine Coons, it removes up to 95% of loose undercoat without scraping or irritating skin. The included dual-density comb finishes the topcoat, so you get a full groom without buying a second tool.

The lightweight build and non-slip handle keep your hand from tiring, and the silicone hook lets you hang it within reach for daily use. If you hate the mess of fur flying everywhere while you brush, this rake’s self-cleaning feature alone justifies its spot in your grooming drawer.

Four deShedding edges mean you cover more fur in each stroke than a single-blade rake, which is exactly what makes this tool effective for long-haired dogs that shed heavily. The composite carbon fiber edges are a deliberate departure from metal blades, and the eight SafetyNubs along the head keep those edges from digging into skin when you’re working through a thick undercoat. It’s designed for the owner who wants to reduce loose hair without worrying about nicks or irritation, and the lightweight build makes it easy to maneuver around sensitive areas like bellies and legs.

At just 0.2 pounds, this brush is lighter than the FURminator deShedding Tool for large dogs (0.6 pounds), making it easy to handle for long grooming sessions. Its four carbon fiber edges spread pressure across a larger surface area than typical brushes, so it removes loose fur and undercoat without cutting the topcoat. The eight SafetyNubs prevent scraping, which means you can brush confidently even on sensitive areas.

A dual-sided rake that starts with nine teeth to break up mats and switches to seventeen teeth for undercoat thinning means you get two tools in one handle. The rounded teeth are designed to remove loose hair without irritation, which matters when you’re working through a thick double coat. At 0.2 pounds and with a non-slip rubber base, the handle stays put during grooming. This rake is intended for pets with long-haired or dense double coats, covering both detangling and deshedding in one tool.

With a 6.6-inch length, you’ll make more passes on a large dog compared to some wider tools. That extra time is fine for a medium-sized long-haired dog, but for larger breeds, the narrower head may slow you down. The two tooth counts cover coarse detangling and finer deshedding, but there’s no third option for a final smooth-out pass. For most long-haired dogs, the dual sides offer convenience.

Reducing shedding by up to 90% after just one short session is the kind of number that makes you pay attention. The double row of stainless steel pins pulls loose undercoat without damaging the coat or hurting your pet, and the non-slip silicone handle keeps your grip steady. It works on dogs, cats, rabbits, and horses with short, medium, or long hair. Owners who want maximum hair removal in minimum time will appreciate how lightweight it is at only 0.1 pounds.

At 0.1 pounds, this brush is much lighter than the FURminator deShedding Tool for large dogs, which weighs 0.6 pounds. The contouring handle is made of non-slip, non-toxic silicone, and the stainless steel pins are designed to be gentle. Reviewers report it works well for reducing shedding on heavy-shedding coats, but it lacks the heft of heavier tools. For owners who want a gentle, efficient undercoat rake, this is a practical choice.

A single row of rounded stainless teeth is the whole point here. Most undercoat rakes cram two rows into the head, which drags more hair at once but also tugs harder on mats. The aumuca Undercoat Rake uses one row with rounded tips, so it lifts loose undercoat in a single pass without digging in or catching on tangles behind the ears. It works through thick double coats on breeds like German Shepherds, Golden Retrievers, Huskies, Pomeranians, Corgis, and Shih Tzus that drop undercoat year-round.

A 2.2-inch head and a single row mean you cover less ground per stroke than a double-sided rake like the Maxpower Planet Dog Grooming Rake, so grooming a heavy shedder like a German Shepherd takes more passes. But that same design keeps the brush light at 0.1 pounds, easy to maneuver around legs and chest mats without the dog squirming away. Owners report it works through a thick double coat without digging into skin, and the snap-on blade cover keeps the stainless edge safe between uses.

An extra-large head that covers more coat per stroke means you spend less time brushing a heavy-shedding Great Pyrenees or Husky. The two-sided hooked-blade design tackles both stubborn mats with the wide teeth and lifts loose undercoat with the fine teeth, so you don’t need a second tool. Rounded stainless steel edges glide through fur without scratching, and the solid wood handle gives you a grip that won’t slip when your dog is fidgety.

At 0.4 pounds, it’s heavier than some grooming rakes like the Pet Teezer or DOGI, which matters if your dog has sensitive skin and you need a lighter touch. Compared to the FURminator, which is designed for undercoat removal, the KIZO ESLO gives you both dematting and deshedding in one head, but you have to be careful not to force it through tight tangles. It’s built for the big jobs, not for quick touch-ups on a lap dog.