10 Best Products To Stop Dog Shedding in 2026

The tool reaches through the topcoat to remove loose undercoat hair without cutting skin or damaging the topcoat when used as directed. The ergonomic handle and FuRejector button make the job less of a chore, so you can focus on the dog instead of wrestling with clumps of fur. It is designed for large dogs over 50 pounds with long hair, which is the group this tool targets. If your dog fits that description, this tool addresses the undercoat shedding directly.

The trade-off is that this tool demands weekly use as directed to keep shedding under control. It is not a quick swipe for maintenance; it is a deliberate grooming session. Compared to the SleekEZ brush, which works on short, medium, and long coats, the FURminator is designed specifically for long-haired dogs over 50 pounds. If you have a double-coated long-haired dog over fifty pounds, the extra effort pays off in noticeably less hair on your floors and furniture. For smaller dogs or short-haired breeds, consider other options from the guide.

The two-sided hooked-blade head is the defining feature here: wide teeth break up stubborn mats while fine teeth lift loose undercoat in fewer passes. That extra-large head covers more ground per stroke, which matters when you’re working through a Great Pyrenees or Husky during peak shedding season. The rounded stainless-steel edges glide through dense fur with less scratching, and the solid wood handle gives you a secure grip even when your hands are tired. This rake is built for thick, double-coated dogs that need serious dematting and deshedding in one tool.

Weight and specificity are the key considerations here. The instructions warn against forcing it through tight mats, which means you still need patience and gentle technique. For owners of Labs, Goldens, or Bernese Mountain Dogs who want a single tool that handles both detangling and undercoat removal, this rake delivers without needing a second brush.

At just 0.2 pounds, this rake is light enough to use for an entire grooming shift without your hand cramping, which is exactly what the ergonomic handle was designed for. The fine-tooth blade targets the undercoat specifically, pulling loose hair while leaving the topcoat intact, a balance that matters if you’re brushing a Labrador or Shepherd day in and out. It suits anyone who needs a precise, salon-grade tool for regular maintenance on shedding breeds, especially if comfort over long sessions is your priority.

The fine-tooth design targets the undercoat specifically, pulling loose hair while leaving the topcoat intact, a balance that matters if you’re brushing a Labrador or Shepherd day in and out. It suits anyone who needs a precise, salon-grade tool for regular maintenance on shedding breeds, especially if comfort over long sessions is your priority. At just 0.2 pounds, this rake is light enough to use for an entire grooming shift without your hand cramping, which is exactly what the ergonomic handle was designed for.

The rounded stainless-steel teeth are the core of this brush, they glide through the topcoat and dig into the undercoat where most shedding starts, without scraping your dog’s skin raw. That matters because heavy-shedding double coats (think Huskies, Golden Retrievers, or German Shepherds) need a tool that reaches deep without yanking. The ergonomic non-slip handle also lets you work through a full shedding session without your hand cramping, which is a real perk when you’re brushing a large dog that’s dropping fur like confetti. This brush is built for owners who want to tackle the root of the mess, not just skim loose hair off the surface.

This tool is single-minded: it’s great at undercoat removal, but it won’t double as a dematting comb or a finishing brush. If your dog also has tangles or you want a polished topcoat between baths, you’ll need a second tool. Compared to the FURminator Large Dog Undercoat deShedding Tool, which is also aimed at heavy shedders, the Be Best Pets brush uses rounded teeth instead of a blade edge. That makes it gentler for dogs with sensitive skin, but it may require more passes to pull the same volume of loose fur. For owners dealing with a heavy-shedding double-coat dog that hates being groomed, this is the less stressful starting point.

For someone who wants a gentle, no-fuss brush that works on a variety of pets without turning grooming into an arm workout, this fits the bill.

The narrower 4-inch blade means you will need extra passes when working on thick double coats common in large breeds. For comparison, the FURminator Large Dog Undercoat deShedding Tool weighs 0.6 pounds and has a longer reach, which can cover more area per stroke on a big dog. Owners of heavy-shedding breeds may find the Hertzko’s smaller cutting edge less efficient for tackling dense undercoats, though it remains effective for regular maintenance on smaller animals or short-haired pets. The trade-off is a lighter tool that is easier to maneuver in tight spots.

At 0.2 pounds and 5.5 inches long, the SleekEZ is light enough to use through a full deshedding session without hand fatigue. Its patented design grabs at the tips of the hair to remove loose undercoat without painful tugging, which makes it a good choice for dogs that dislike regular brushing. It works on short, medium, and long coats, so it suits households with multiple dogs of different fur types or a single dog with a mixed coat.

The 5.5-inch tool is shorter than the FURminator Large Dog Undercoat deShedding Tool, which measures 6.5 inches in length. For a Great Dane or a heavy-shedding Labrador, you will make more passes to cover the same area, so the job takes a bit longer. Still, the SleekEZ also works as a carpet rake and furniture hair remover, meaning you can de-fur your couch in the same session without switching tools. It is a smart middle-ground pick for owners who want one tool that does not discriminate by coat length.

The dual-sided design with a 9-teeth side for stubborn mats and a 17-teeth side for thinning and deshedding means you get two tools in one without swapping brushes. That matters when your dog has a thick double coat and you’re working through tangles first, then finishing with the finer side to pull out loose undercoat. It’s lightweight at 0.2 pounds, so your hand won’t tire during a full grooming session, and the non-slip rubber base keeps the rake from sliding around on slick fur. This suits owners who want a single affordable tool that handles both dematting and daily shedding control without fuss.

The same light weight and compact 6.6-inch length that make it easy to maneuver on a small or medium dog also mean it lacks the heft and reach for heavy-duty work on a large breed with a very dense coat. Compared to the FURminator Large Dog Undercoat deShedding Tool, which weighs 0.6 pounds and has a longer handle, the Maxpower Planet rake is better suited for regular maintenance than for breaking through a full winter undercoat on a large dog. If your dog is on the smaller side or you just need a quick weekly touch-up, this is a practical choice.

A 5-inch stainless-steel blade with rounded teeth lifts loose undercoat from both short and long hair without cutting or pulling, so you can groom a small dog’s face, legs, and paws without worrying about irritation. That compact size gives you precise control on pets under 50 pounds, making it easier to reach tight spots than a larger tool. It removes the dead undercoat that causes shedding while leaving the healthy topcoat untouched, which means less fur on your couch without damaging the coat.

The EquiGroomer is best for dogs up to 50 pounds and cats of any size, so it’s a precision tool for smaller pets rather than a speed tool for large ones. Its compact 5-inch stainless-steel blade reaches faces, legs, paws, and tight spots easily, giving you control for stress-free grooming on sensitive areas. If your pet fits that size window, the gentle action makes it a practical daily brush.

The dual-sided design gives you two tools in one: start with the 9-tooth side to work through stubborn mats and tangles, then flip to the 17-tooth side for thinning and pulling out loose undercoat. At just 0.2 pounds with a non-slip rubber handle, you can groom a full double coat without your hand cramping up halfway through. This is the brush for anyone dealing with daily tumbleweeds of fur and wants one tool that handles both detangling and deshedding in a single session.

It’s designed specifically for medium to long-haired dogs and cats, so if you have a short-coated breed like a Labrador or a Beagle, the extra-wide head and the tooth spacing may not grab the finer hair as effectively. For owners of Goldens, Collies, or Maine Coons who want maximum shedding reduction without switching tools mid-groom, this is the one to grab.

With 23 deshedding blades on one side and 12 dematting blades on the other, this comb tackles two jobs without swapping tools. That dual-sided design means you can work through tangles on a doodle’s ears, then flip to pull loose undercoat from a husky’s back in the same session. The lightweight build and non-slip handle keep your hand from cramping during longer grooming rounds, which matters when your dog thinks the brush is a chew toy and you’re racing the clock. It suits owners of double-coated breeds like Goldens and Poodles who want one tool for both mat removal and shedding control, especially if you have a cat in the house too.

The 2.5-inch head width means you’ll make more passes on a large double-coated dog compared to wider rakes on the market. That’s fine for spot work or smaller pets, but if your main goal is clearing a big coat fast, a wider rake saves time. Still, for an owner who deals with both mats and shedding, the two-in-one design avoids juggling separate tools, and the stainless steel holds up wash after wash without rust spots.